Saving & Restoring Camera Setup Configurations; Figure 22. Relationship Between The Camera Settings - Dalsa ML Series Manual

Saving & Restoring Camera Setup Configurations
See the section Camera Information Category in Appendix A for GenICam features associated with
this section and how to use them
Relevant Features: UserSetSelector,
UserSetLoad, UserSetSave
An inspection system may require several different illumination, resolution, and responsivity
configurations in order to cover the different types of inspection it is expected to perform. The
camera includes 16 user sets where camera setup information can be saved to and restored from—
either at power up, or dynamically during inspection.
The settings active during the current operation can be saved using the user set selector and user
set save features.
A previously saved user setting (User Set 1 to 16) or the factory settings can be restored using the
user set selector and user set load features.
Either the factory setting or one of the user settings can be configured as the default setting, by
selecting the set in the user set default selector. The set selected is the set that is loaded and
becomes active when the camera is reset or powered up.
The relationship between the settings is illustrated in Figure 22. Relationship between the Camera
Settings:
By GenIcam Command
1. Select a 'Factory Set'
2. Initiate a 'User Set Load'
Facrory Setting
By GenIcam GenIcam Command
1. Select 'Default Set' as Factory
(Saves Automatically)
Linea ML Color Cameras
UserSet1
GenIcam Input
Power Up
Active Setting
Or Reset

Figure 22. Relationship between the Camera Settings

thru UserSet16, UserSetDefaultSelector,
By GenIcam Command
1. Select a 'User Set'
2. Initiate a 'User Set Load'
Power Up
Or Reset
By GenIcam Command
1. Select 'Default Set' as Uset Set #
(Saves Automatically)
By GenIcam Command
1. Select a 'User Set'
2. Initiate a 'User Set Save'
Camera Performance and Features  47
User Setting