Panasonic VL-SWD275 Instruction Manual page 14

2-2 How to make wiring connections
While pressing on the button (F) with a
pointed object such as a screwdriver, insert
the wire into the terminal connector (G). (To
disconnect a wire, pull out the wire while
pressing on the button (F).)
F
G
I
H Core conductor wire at tip: 9 mm
I Wiring from doorphone or other device
Important:
R Do not connect the power cable.
(Damage may occur.)
Note:
R Do not remove the terminal cover.
(Excluding power supply unit attached
models.VL-SWD275AZ/VL-MWD275AZ
etc.)
3
Mount the main monitor/extension monitor to
the mounting bracket.
14
H
[For power supply unit non-attached
models]
VL-SWD275BX/VL-MWD275BX etc.:
3-1 Line up the tab on the bottom of the
bracket with the groove on the main monitor/
extension monitor.
3-2 Line up the tab on the top of the bracket
with the groove on the main monitor/extension
monitor, and push the main monitor/extension
monitor down until it is secure.