Panasonic VL-SWD275 Instruction Manual page 10

Examples of camera angle
Facing forwards
Facing left
R The angle can also be adjusted to the right
or upper right.
Important:
R When the camera angle is adjusted to the
upper left or upper right, the image may be
slightly distorted.
4
Connect the wires.
Loosen the screws. Push in the wires to the
terminal connectors (non-polar), then tighten
the screws (A).
1
A – Recommended torque: 0.5 N·m
{5.1 kgf·cm}
– Maximum torque: 0.7 N·m {7.1
kgf·cm}
10
Facing upwards
Facing upper left
5
Attach the doorphone to the mounting base.
A
A Screws (accessory) ´ 4
When using flush mount box (option):
Model No. VL-MB524
Attach the doorphone to the flush mount
box.
A
A Screws (locally procured) ´ 4
R 4 mm ´ 25 mm, stainless steel
(the same type of screw as the 4 mm ´
12 mm supplied accessory but with a
different length)
6
Attach the front panel in the order of A ® B.
A
B