Maintenance - Rheem RWI Series Installation Instructions Manual

MAINTENANCE

WARNING
THESE INSTRUCTIONS ARE
INTENDED AS AN AID TO
qUALIFIED SERVICE
PERSONNEL FOR PROPER
INSTALLATION, ADJUSTMENT
AND OPERATION OF THIS UNIT.
READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
ATTEMPTING INSTALLATION
OR OPERATION. FAILURE TO
FOLLOW THESE INSTRUCTIONS
MAY RESULT IN IMPROPER
INSTALLATION, ADJUSTMENT,
SERVICE OR MAINTENANCE,
POSSIBLY RESULTING IN FIRE,
ELECTRICAL SHOCk, CARBON
MONOXIDE POISONING,
EXPLOSION, PROPERTY
DAMAGE, PERSONAL INJURY
OR DEATH.
DISCONNECT MAIN ELECTRICAL
POWER TO THE UNIT BEFORE
ATTEMPTING ANY MAINTE-
NANCE. FAILURE TO DO SO CAN
CAUSE ELECTRICAL SHOCk
RESULTING IN PERSONAL
INJURY OR DEATH.
CAUTION
DO NOT OPERATE THE SYSTEM
FOR EXTENDED PERIODS
WITHOUT FILTERS.
A PORTION OF THE DUST
ENTRAINED IN THE AIR MAY
TEMPORARILY LODGE IN THE AIR
DUCT RUNS AND AT THE SUPPLY
REGISTERS. THIS RESIDUE CAN
SOIL CEILINGS, WALLS, DRAPES,
CARPETS AND OTHER
HOUSEHOLD ARTICLES.
FIGURE 17
JACKET ASSEMBLY
SOLID BOTTOM
RELOCATE TO
BOTTOM FOR
SIDE RETURN
ALWAYS
REMOVE FROM
SHIPPED LOCATION
NOTE: DISCARD BLOCk OFF PLATE
IF SIDE RETURn IS nOT REQUIRED.
SCREWS (2) REQ'D
ST-A1242-06-X0
25