Table of Contents
Advertisement
1.
Open the OSD menu and go to the
2.
Press Enter.
3.
Press
to correct keystoning at the top of the image or press
keystoning at the bottom of the image. Press
of the image. Press
Adjusting 4 corners
You can manually adjusts the shape and size of an image that is unevenly rectangular on all
sides.
1.
To display the Corner Adj. page, you can do
one of the followings:
i. Press Enter.
ii. Open the OSD menu and go to the
DISPLAY >
press Enter. The Corner Adj. page is
displayed.
2.
Press
/
/
wish to adjust and press Enter.
3.
Press
/
to select an adjustment method
that suits your need and press Enter.
4.
As indicated on the screen (
degree angle adjustment and
a 90-degree angle adjustment), press
/
to adjust its shape and size. You can
press Menu or Exit to go back to a previous
step. A long press for 2 seconds on Enter will
reset the settings on the corner that you chose.
Adjusting keystone will reset the Corner Adj. settings.
After the Corner Adj. settings have been modified, some aspect ratios or timings are not
available. When that happens, reset the settings on all 4 corners.
The following messages will appear:
DISPLAY >
to correct keystoning at the left side of the image.
Corner Adj. menu and
/
to select the corner you
/
for a 45-
/
/
/
26
Keystone menu.
to correct keystoning at the right side
A long press for 2 seconds on
Enter when this page displays
will reset the settings on all 4
corners.
Indicates the corner that you
selected.
for
/
/
to correct
Advertisement
Table of Contents
