Download Print this page
Global 246610 User Manual
Hide thumbs Also See for 246610:

Advertisement

Quick Links

READ & SAVE THESE INSTRUCTIONS
WARNING
• TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
• This product contains chemicals which are
known to the state of California to cause
birth defects or other reproductive harm.
• This product is not for use in explosive
or combustible atmospheres.
• Read and follow all instructions before
operating the product. Do not use the
product if any part is damaged or missing.
• Do not alter the product's assembly.
• All electrical connections should be made
by a qualified electrician. Installation
work and electrical wiring must be done
by qualified person(s) following all local
electrical and safety codes in the United
States and Canada, as well as the National
electrical Code (NEC) and the Occupational
Safety and Health Act (OSHA) in the United
States, and the Canadian Electric Code
(CEC) in Canada.
• Use OSHA approved lock-out tag-out
devices on power supply to prevent shock
and/or electrocution.
• When cutting or drilling into wall or ceiling,
do not damage electrical wiring and other
hidden utilities.
AIR CURTAIN
• To reduce the risk of fire or electrical shock,
do not expose to water or rain.
• To reduce the risk of fire or electrical shock,
do not use this product with any solid state
speed control device.
• To reduce the risk of fire or electrical shock,
do not use an extension cord, unit is
intended to be permanently hard wired to
properly rated electrical service outlet (120V
60Hz).
• To reduce the risk of injury to persons, install
product at least 7 feet (2.1m) above the floor
(8 feet in Canada).
• The product frame and motor must be
electrically grounded to a suitable electrical
ground, such as a grounded water pipe or
ground wire system.
• This has a single speed motor which is
equipped with a thermo – protector and
will automatically de-energize the product if
it overheats for any reason.
RULES FOR SAFE OPERATION:
1. Never insert fingers or any other objects
through the grill guard when product is
in operation.
2. If the power supply cord is damaged,
contact your local service centre or a
qualified electrician to install an
appropriate replacement cord to prevent
any injury or damage.
1
246610
246609
246608
3. Disconnect the product from its power
source when removing guards for
cleaning.
4. Do not use the product in windows.
Rain and moisture may create electrical
hazard.
5. Do not place the product near an open
flame, cooking or heating appliance, or
hot surface.
6. This product is for indoor dry applications.
7. This product should not be operated
outside.
8. Periodically clean the propeller, guard,
motor, and louver of any accumulated
dirt.
9.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
10.
Children should be supervised to ensure
that they do not play with the appliance.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 246610 and is the answer not in the manual?

Questions and answers

Summary of Contents for Global 246610

  • Page 1 AIR CURTAIN 246610 246609 246608 READ & SAVE THESE INSTRUCTIONS • To reduce the risk of fire or electrical shock, 3. Disconnect the product from its power WARNING do not expose to water or rain. source when removing guards for •...
  • Page 2 Current Power Velocity Noise Inch 246608 2.10 2.85 246609 2.65 3.50 3.60 4.80 246610 2. WIRING DIAGRAM 246608 / 246609 246610 3. INSTALLATION DIMENSIONS ( Inch ) mounting air inlet plate air outlet control switch 8 mounting holes MODEL (8mm wood screws)
  • Page 3 AIR CURTAIN 4. INSTALLATION METHOD WARNI NG ● Installation and electrical connection must be performed by a qualifed technician. 1) Accessories 6 sets of (M8x60L) Fastening bolts, Washer, Spring washer, and (M8) Nut. 2) Check to ensure the voltage / frequency on rating label is complied with the local power source before use.
  • Page 4 AIR CURTAIN 6) Other installation methods. See the following diagram: Bolt & Nut Wood Screw I n stallation on a Steel Framework Installation on a Wooden Framework 7) Use more than one unit of Air Curtain with appropriate length to fll up the width of the doorway.

This manual is also suitable for:

246609246608