SpotOn Virtual Fence User Manual page 4

3. Download the App
While the collar is charging, download the SpotOn app,
create a new account, and verify your email.
The SpotOn VSF app is available for both iOS and
Android devices.
4. Register your SpotOn Virtual Fence
The first time you log in, you'll need to register your
SpotOn system. Just enter the eight-digit Collar ID
and your pup's info to get started. Your SpotOn Fence
is now registered!
Now you can invite family members so that more than
one person can activate and deactivate fences, receive
notifications, and track your pup.
In Account Settings, select FAMILY MEMBER ACCESS
and enter email addresses for the family members you
would like to invite— their accounts will automatically
be linked to your dog's collar.
HELPFUL HINT:
If the collar is registered before cellular/tracking is activated, a generic home screen will
appear on the collar until tracking activation is complete.
4
Collar ID
Number
5. Activate Cellular Service
You don't need cell service in order to keep your pup contained (the
SpotOn Fence works using GPS satellites), but optional cellular service
does allow you to:
• Track your pup's location
• Receive battery and escape notifications
• Manage your fences right from the app
• View your pup's contact info on the collar screen
After you activate cellular, power down the collar for about five minutes and then power
on outside to establish a connection to the cell network. Give it five minutes to boot up and
establish connections then toggle through any notifications and you'll see the screen below.
You are now ready to create your first custom fence!
Bluetooth
(blue when
connected,
Static
white
Correction when not Cellular
Level (0-30) connected) Connection
Scan to activate
cellular/tracking
Up
GPS Fix
(green for
good signal,
red for weak
signal)
Battery Life
Power/Enter
Down
5