Table of Contents
Advertisement
11.1.2. Human body grounding
1. Use the anti-static wrist strap to discharge the static electricity
from your body.
11.1.3. Handling of optical pickup
1. To keep the good quality of the optical pickup maintenance parts
during transportation and before installation,. the both ends of
the laser diode are short-circuited. After replacing the parts with
new ones, remove the short circuit accordingto the correct
procedure. (See this Technical Guide.)
2. Do not use a tester to check the laser diode for the optical pickup.
Failure to do so will damage the laser diode due to the power
supply in the tester.
11.2. Handling Precautions for Traverse Unit (Optical Pickup)
1. Do not give a considerable shock to the traverse unit (optical
pickup) as it has an extremely high-precise structure.
2. When replacing the optical pickup, install the flexible cable and
cut its short land with a nipper. See the optical pickup
replacement procedure in this Technical Guide. Before replacing
the traverse unit, remove the short pin for
preventingstaticelectricity and install a new unit. Connect the
connector as short times as possible.
3. The flexible cable may be cut off if an excessive force is applied
to it. Use caution when handling the cable.
Advertisement
Table of Contents
