Advertisement
Safety - Overheat protection
For your safety this appliance is fitted with a thermal cut-
out. In the event that the product overheats for some reason,
the cut-out prevents excessive temperatures on the product
by cutting the power to the heater. Once the heater has
cooled down, it will reset automatically, it will continue to
cycle on and off automatically until the reason for
overheating is removed.
Cleaning
WARNING – ALWAYS DISCONNECT FROM THE POWER
SUPPLY BEFORE CLEANING THE HEATER.
Before commencing cleaning, unplug the heater and allow
it to cool. Disconnect the electricity supply to the appliance.
The outside can be cleaned by wiping it over with a soft
damp cloth and then dried. Do not use abrasive cleaning
powders or furniture polish, as this can damage the surface
finish.
To release heater from the wall bracket for cleaning or
redecoration, depress latch on both brackets (see Fig. 2)
and hinge forward.
Recycling
At the end of the electrical products useful life it
should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice in your country.
After Sales Service
Please see the separate Warranty leaflet for details of your
Warrantee & after sales service including contact details.
Should you require after sales service, please get in touch
with the supplier through whom you purchased the
appliance, or the contact number on your Warranty leaflet.
Please retain your receipt as proof of purchase.
Advertisement
