O) Programming Of A Track Sequence; P) Fader Start; Q) Switch Off - Renkforce SCDJ-350USB Operating Instructions Manual

o) Programming of a Title Sequence
• Stop playback.
• Push the PROG button (31).
• Select the first track to be played with the dial TRACK/FOLDER(10) and the button FOLDER (11).
• Push the button PROG (31) again and then choose the next track with the dial TRACK/FOLDER(10) and the
button FOLDER (11).
• Proceed as described above until all tracks have been programmed in the desired order.
• Press the PLAY/PAUSE (12) button to play back the track sequence.
• To delete the programmed track sequence again, keep the button PROG (31) pushed for 3 seconds until
the PROGRAM in the display goes out.

p) Fader Start

Fader start playback
• Connect the FADER START (4) connection to the corresponding connection of a mixer.
• Once the corresponding fader or crossfader at the mixer is operated, the player will automatically start
playback or automatically activate the pause function (also see the corresponding operating instructions
of the mixer).
The mixer must provide a moment contact (scan function).
q) Deactivating
• Interrupt playback by pushing the PLAY/PAUSE button (12).
• Switch off the amplifier and any connected mixer.
• Then switch off the player using the power switch (1).
45