Auto Vlan Assignment; Important Considerations - 3Com 3C17300-US Implementation Manual

Superstack 3 switch 4226t
Table of Contents

Advertisement

Auto VLAN
Assignment
Important
Considerations
allowDefaultAccess grants a device access based on the port's
configured VLAN and QoS parameters.
blockMacAddress blocks (filters) any traffic to or from the device.
Rada is similar to DUD (Disconnect Unauthorized Device), only Rada
affects a single device where as DUD affects the whole port.
Rada can also be used in conjunction with the existing 802.1X Secure
Network Login to provide the capability to support a variety of host and
network configurations.
RADIUS Server settings for Rada
When setting up Rada on a RADIUS server the following attributes should
be taken into consideration.
Users must be set up on the RADIUS Server for each device that is to
be authenticated, using the MAC address for username and the same
MAC address for the password.
The username should be set as the MAC address of the device. This
must be of the form of Hex digits separated by hyphens, for example
'08-05-54-AB-CD-EF'.
Table 7 Setting Rada attributes
Attribute
Framed-Protocol
Service-Type
Auto VLAN assignment complements the basic Network Login and Rada
features. It allows an appropriate VLAN configuration to be obtained
from a RADIUS server when a user or device authenticates on a port. The
configuration obtained will be specific to the user or device authenticated
on the port.
The RADIUS Server may be configured with VLAN parameters for each
user or device. One or more VLANs may be configured for each user, to
allow multiple VLANs to be communicated to the device requesting the
user authentication.
This section contains some important considerations when using Network
Login or Rada on the Switch .

Auto VLAN Assignment

Value
PPP
Framed
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents