Advertisement
ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM
RCA Jacks
(sold separately)
Factory Radio
Bass Knob
Factory Amp
Bypass & Remove
Black - Ground
Any remaining wires
Orange - Control
tape off and disregard
Assignable Outputs Labeled CH 6-10
An SPDT relay, Metra part number
E-123, is required if the amp turn-on
current of all amps exceeds 1-amp.
Factory Radio Harness
Vehicle T-Harness
Interface
Unplug connector
Interface Harness
Any remaining wires
tape off and disregard
Blue/White - Amp Turn-On Wire
4
Advertisement
