Front Passenger's Frontal Airbag On And Off Indicators; Check Engine Warning Light/Malfunction Indicator Lamp - Subaru 2011 Legacy Owner's Manual

Hide thumbs Also See for 2011 Legacy:
Table of Contents

Advertisement

3-12
Instruments and controls
& Front passenger's frontal
airbag ON and OFF indica-
tors
ON or
: Front passenger's frontal airbag ON
indicator
or
: Front passenger's frontal airbag
OFF indicator
The front passenger's frontal airbag ON
and OFF indicators show you the status of
the front passenger's SRS frontal airbag.
The indicators are located next to the
clock in the center portion of the dash-
board.
When the ignition switch is turned to the
"ON" position, both the ON and OFF
indicators illuminate for 6 seconds during
which time the system is checked. Follow-
ing the system check, both indicators turn
off for 2 seconds. After that, one of the
indicators illuminates depending on the
status of the front passenger's SRS frontal
airbag determined by the SUBARU ad-
vanced frontal airbag system monitoring.
If the front passenger's SRS frontal airbag
is activated, the passenger's frontal airbag
ON indicator will illuminate while the OFF
indicator will remain off.
If the front passenger's SRS frontal airbag
is deactivated, the passenger's frontal
airbag ON indicator will remain off while
the OFF indicator will illuminate.
With the ignition switch turned to the "ON"
position, if both the ON and OFF indica-
tors remain illuminated or off simulta-
neously even after the system check
period, the system is malfunctioning.
Contact your SUBARU dealer immedi-
ately for an inspection.
&
CHECK ENGINE warn-
ing light/Malfunction
indicator lamp
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator lamp illumi-
nates while you are driving, have
your vehicle checked/repaired by
your SUBARU dealer as soon as
possible. Continued vehicle opera-
tion without having the emission
control system checked and re-
paired as necessary could cause
serious damage, which may not be
covered by your vehicle's warranty.
If this light illuminates steadily or blinks
while the engine is running, it may indicate
that there is a problem or potential
problem somewhere in the emission con-
trol system.
! If the light illuminates constantly
If the light illuminates constantly while
driving or does not turn off after the engine
starts, an emission control system mal-
function has been detected.
You should have your vehicle checked by
an authorized SUBARU dealer immedi-
ately.
NOTE
This light also illuminates when the fuel
filler cap is not tightened until it clicks.
If you have recently refueled your vehicle,
the cause of the CHECK ENGINE warning
light/malfunction indicator lamp coming on
could be a loose or missing fuel filler cap.
Remove the cap and retighten it until it
clicks. Make sure nothing is interfering
with the sealing of the cap. Tightening the
cap will not make the CHECK ENGINE

Advertisement

Table of Contents
loading

This manual is also suitable for:

LegacyLegacy outback

Table of Contents