Subaru 2008 Forester Owner's Manual page 174

! To select a track from its beginning
! Forward direction
Briefly press the " " side of the button
(10) to skip to the beginning of the next
track. Each time the button is pressed, the
indicated track number will increase.
! Backward direction
Briefly press the " " side of the button
(10) to skip to the beginning of the current
track. Each time the button is pressed, the
indicated track number will decrease.
! To select a folder (for MP3/WMA
audio)
Turn the "TUNE/FOLDER/CH" dial (14) to
select the folder.
! Fast-forwarding and fast-reversing
! Fast-forwarding
Press the " " side of the button (10)
continuously to fast-forward the disc.
Release the button to stop fast-forwarding.
! Fast-reversing
Press the " " side of the button (10)
continuously to fast-reverse the disc.
Release the button to stop fast-reversing.
! Repeat playback
Depress the "RPT/RDM" button (11) while
a song is playing to play the song
repeatedly. Each time this button is
pressed, the repeat play mode will change
in the following order:
The "RPT" indicator will come on and the
song will be played continuously. When
the repeat OFF is selected, the "RPT"
indicator goes out and normal playback
mode is restored.
The repeat play mode will be can-
celled if you perform any of the follow-
ing steps:
– Press the "RPT/RDM" button to
select the repeat OFF.
– Press the eject button.
– Press the "LOAD" button.
– Select the radio mode.
– Turn the "TUNE/FOLDER/CH"
dial (for MP3/WMA audio).
– Turn off the power of the audio
equipment.
– Turn the ignition switch to the
"LOCK" position.
! Random playback
Press the "RPT/RDM" button (11) for more
than 2 seconds while a disc is being
played back to play all songs on the disc in
a random order.
Audio
The "RDM" indicator will come on and all
songs on the disc will be played in a
random order. When the random OFF is
selected, the "RDM" indicator goes out
and normal playback mode is restored.
The random play mode will be
cancelled if you perform any of the
following steps:
– Press the "RPT/RDM" button to
select the random OFF.
– Press the eject button.
– Press the "LOAD" button.
– Select the radio mode.
– Turn the "TUNE/FOLDER/CH"
dial (for MP3/WMA audio).
– Turn off the power of the audio
equipment.
– Turn the ignition switch to the
"LOCK" position.
! How to unload CDs from the player
! Ejecting a CD from the player
Of the discs loaded, you can select and
remove only one disc.
1. Press the disc select button (15) of the
disc whose disc number indicator (12) is
ON.
2. Press the eject button (8). Then the
disc number indicator associated with the
– CONTINUED –
5-17