Light Control Switch; Headlights - Subaru 2008 Forester Owner's Manual

Hide thumbs Also See for 2008 Forester:
Table of Contents

Advertisement

3-20
Instruments and controls
set the minutes, press the "M" button. To
reset the minutes to "00" with a radio time
signal, push the "Reset" button.
CAUTION
To ensure safety, do not attempt to
set the time while driving, as an
accident from inadequate attention
to the road could result.
NOTE
The clock uses a liquid crystal display.
You will find time indications hard to
see if you wear polarized glasses.

Light control switch

The light switch operates only when the
ignition switch is in the "ON" position.
WARNING
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the "ON" position. In any other
position, the vehicle's lights will be
out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
& Headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position:
Parking lights, instrument panel illumina-
tion, front side marker lights, tail lights and
license plate light are on.
second position:
Headlights, parking lights, instrument pa-
nel illumination, front side marker lights,
tail lights, and license plate light are on.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forester 2008

Table of Contents