To Temporarily Cancel The Cruise Control - Subaru 2005 Baja Owner's Manual

1. Push the "CRUISE" main switch. The indicator light
on the switch will come on.
2. Depress the accelerator pedal until the vehicle
reaches the desired speed.
3. Push the control lever downward in the "SET,
COAST" direction and release it. Then release the ac-
celerator pedal.
The vehicle will maintain the desired speed.
At this time, the " " indicator light is illuminated in
the combination meter.
Vehicle speed can be temporarily increased while
driving with the cruise control activated. Simply de-
press the accelerator pedal to accelerate the vehicle.
When the accelerator pedal is released, the vehicle
will return to and maintain the previous cruising speed.
To temporarily cancel the cruise con-
trol
There are four ways to cancel the cruise control tem-
porarily:
Depress the brake pedal.
Pull the control lever in the "CANCEL" direction. (if
so equipped)
Depress the clutch pedal (manual transmission ve-
hicles only).
Shift the selector lever into the "N" position (auto-
matic transmission vehicles only).
Shift the shift lever into neutral position (manual
transmission vehicles only).
The " " indicator light in the combination meter
goes off when the cruise control is cancelled.
To resume the cruise control after it has been tempo-
rarily canceled and with vehicle speed of about 20
UB4010KA
mph (32 km/h) or more, push the control lever upward
in the "ACCEL, RESUME" direction to return to the
original cruising speed automatically.
The " " indicator light in the combination meter
will automatically come on at this time.
Starting and operating
– CONTINUED –
7-39