Cruise Control Set Indicator Light - Subaru 2005 Baja Owner's Manual

press the control lever downward in the "SET,
COAST" direction once. Now the desired speed is set
and the vehicle will keep running at that speed without
depressing the accelerator pedal.

Cruise control set indicator light

Non-turbo models
The light comes on when vehicle speed has been set.
Turbo models
The Cruise set indicator light comes on when the igni-
tion switch is turned to the "ON" position and goes out
after about three seconds.
The light comes on when vehicle speed has been set.
NOTE
If you move the cruise control lever while turn-
ing the ignition switch "ON", the cruise control
function is deactivated and the cruise control set
indicator light flashes. To reactivate the cruise
control function, turn the ignition switch back to
the "ACC" or "LOCK" position, and then turn it
again to the "ON" position.
If this indicator light and the "
light flash simultaneously during driving, have the
vehicle checked by your nearest SUBARU dealer.
" indicator
Starting and operating
– CONTINUED –
7-41