Advertisement
Table of Contents
Mobile 88-Piece Double-Sided
Parts Bin Rack
User Guide
Safety
• This unit is not a toy and should be kept out of the reach of children.
• Small parts are included that may pose a choking hazard to children and animals. Keep parts away from children
and pets.
• Before assembly, ensure there are no missing or defective parts. Contact the retailer if any parts are missing or
defective.
• Assemble only as instructed in this guide. Any deviation or shortcut may lead to incorrect assembly or be
considered customer misuse. Improper assembly may cause damage or serious injury.
• Do not mount the unit to a vehicle.
• Do not over-tighten mounting screws or parts during assembly as this may damage the unit.
WARNING
• The unit should only be positioned on a flat, level and stable surface.
• Do not exceed the maximum load capacity as this may result in damage or serious injury. Load capacity:
Small bins = 1.5kg (each)
Medium bins = 2.0kg (each)
Large bins = 2.5kg (each)
Top tray = 10kg
Overall capacity = 151kg
• For stability, heavier items should always be placed in the lower bins.
• Do not rest or support items against or on the unit.
CAUTION
• To ensure continued safety, regularly check that the unit is secure and safe to use (every 3 months). Take
appropriate action to rectify any unstable or unsafe units.
• If you do not understand this guide, or have any doubts regarding safety of the assembly, seek advice and
guidance from a qualified person.
• Appropriate protective equipment, such as safety glasses, must be worn and precautions taken when installing this
product.
• It is recommend that two persons install the unit.
• Before installation, ensure the supporting surface will safely support the combined weight of the unit and all stored
items. If unsure, contact a qualified contractor for guidance.
Cleaning and Care
Clean the unit using a damp cloth. Avoid using harsh or abrasive chemicals as this can damage surface finishes.
Included Items
1. Frame Leg x2
2. Bin Support Rail x14
3. Vertical Support Rail x2
4. Top Tray x1
5. Base x1
6. Frame Support Bracket x4
7. Castor with Brake x2
8. Castor x2
9. Handle x1
10. Handle Bracket x2
11. M4x10 Screw x34
12. M6x10 Screw x26
13. M6x35 Screw x4
14. M6 Nut x28
15. M6x15 Screw x2
16. Small Bin x64
17. Medium Bin x18
18. Large Bin x6
Advertisement
Table of Contents
Related Manuals for Baumr-AG Mobile 88-Piece Double-Sided Parts Bin Rack
Summary of Contents for Baumr-AG Mobile 88-Piece Double-Sided Parts Bin Rack
- Page 1 Mobile 88-Piece Double-Sided Parts Bin Rack User Guide Safety • This unit is not a toy and should be kept out of the reach of children. • Small parts are included that may pose a choking hazard to children and animals. Keep parts away from children and pets.
- Page 2 Assembly Attach the castors (7 and 8) to the underside of the base (5). Place the braked castors on one long side of the base, and the non-braked castors on the other side, then fasten using 16 M6x10 screws (12) and nuts (14).
- Page 3 ©2018 Baumr-AG. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning or recording, or any information storage and retrieval system, without express permission or consent from the publisher.
Need help?
Do you have a question about the Mobile 88-Piece Double-Sided Parts Bin Rack and is the answer not in the manual?
Questions and answers