Advertisement
Durawood Sunrise
Counter Height Table
TABLE PARTS
TABLETOP
POLE SUPPORT
PLATE
HARDWARE PACK
Before beginning assembly, make sure you have all parts. Note
that not all parts pictured are to scale.
Congratulations on purchasing this Durawood Sunrise Counter Height Table! You're going to love the quality, durability and simple
assem bly — plus the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, (800) 643-
3522.
ASSEMBLY INSTRUCTIONS
FIGURE 1
2 LEG ASSEMBLIES
4 SPREADERS
4 - 3" Bolts
12 - 2" Flathead Screws
4 - Washers
4 - Lock Washers
4 - Nuts
1 - Allen Wrench
1 - Square Head Drill Bit
Hardware pack
weight: 5.8 oz
ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
STEP 1.
Place Tabletop on flat surface as shown. (FIGURE 1)
STEP 2.
Align holes in one Table Leg with holes in Table Top. ( FIGURE 2 ) and
insert Bolts. Secure bolt by placing one washer, one lock washer and one nut -
in that order. ( FIGURE 3 ). Repeat for second Table Leg.
FIGURE 2
SUGGESTED TOOLS
(NOT PROVIDED)
Standard Phillips Head Screwdriver
•
Adjustable Wrench
•
Drill
•
FIGURE 3
Advertisement
Table of Contents
Related Manuals for Pawleys Island DuraWood Sunrise CT1BLK
Summary of Contents for Pawleys Island DuraWood Sunrise CT1BLK
- Page 1 Durawood Sunrise Counter Height Table TABLE PARTS 2 LEG ASSEMBLIES TABLETOP 4 SPREADERS POLE SUPPORT PLATE 4 - 3" Bolts HARDWARE PACK 12 - 2" Flathead Screws 4 - Washers 4 - Lock Washers 4 - Nuts 1 - Allen Wrench 1 - Square Head Drill Bit SUGGESTED TOOLS (NOT PROVIDED)
- Page 2 STEP 3. Insert Spreader Bars closest to Table Top. (FIGURE 4) Secure using Screws (FIGURE 5). FIGURE 5 FIGURE 4 STEP 4. Insert remaining Spreader Bars (FIGURE 6) and seed Pole Support Plate into place as shown (FIGURE 7). Secure using Screws (FIGURE 8).
Need help?
Do you have a question about the DuraWood Sunrise CT1BLK and is the answer not in the manual?
Questions and answers