Pawleys Island Roman Arc Cypress Hammock Stand Instructions

Roman Arc Cypress
Hammock Stand
I N ST R U C T I O N S

HARDWARE PACK

Quantity per hardware pack (1 per box, 2 packs needed for full assembly)
(2) HEX BOLTS
(5) HEX NUTS
(8) FLAT WASHER
U SA
Made in the
(2) CARRIAGE BOLT

STAND PARTS

The hammock stand is shipped in two boxes. Stand parts and
hardware pack contents listed below are per box. Stand parts and
hardware packs from both boxes are required for assembly.
• CENTER BEAM (WITH FOUR COUNTERSUNK HOLES)
• FOOT BEAM (SHORTEST BEAM)
• END BEAM (WITH ROMAN ARC BRASS TAG)

SUGGESTED TOOLS

• RATCHET OR PLIERS (not included)
• SCREW DRIVER (not included)
• 1 (9/16") DEEP WELL SOCKET TOOL (included in each hardware kit)

CARE INSTRUCTIONS

• Lightly sand once a year and add a coat of boiled
linseed oil to keep the cypress wood in good condition.
NOTE: TWO PERSON ASSEMBLY SUGGESTED
(3) PLASTIC CAPS TO COVER BOLT ENDS
(1) EYE BOLT