Advertisement
noTe: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible
for their safety. children should be supervised to ensure that they do not play with the appliance.
2. INTRODucTION AND SPEcIFIcATION
High velocity industrial two-speed drum fan suitable for movement of huge volumes of air. Professional belt drive motor ensures a
smooth and quiet performance. robust unit with heavy-duty gauge steel casing, guard and frame. Handle, wheels and fully tiltable
cradle allows control of airflow to exactly where it is needed. carefully balanced and fully guarded blades provided. suitable for use
in industrial, commercial, agricultural, automotive workshop and showroom applications. maximum Airflow: 350mtr³/min
(12,300cfm). Fitted with Bs approved plug.
fig.1
3. OPERATION
WARNING! Ensure you read, understand and apply the safety instructions in Section 1 before using the fan.
3.1.
The fan is easily transportable by means of the wheels provided. lift by the handle (fig.2) and manoeuvre the fan into position. ensure that
there is nothing in front of the fan that may be disturbed when the fan is switched on.
The drum can be tilted by loosening the tilt locking handles on either side of the drum, tilt the drum to the required angle and re-tighten the tilt
locking handles.
3.2.
check that the switch situated on the side of the drum is set to "0" (fig.3). Uncoil the power lead from its stowage position (fig.2)
and plug into the mains power supply. ensure that the power lead is not stretched or positioned in such a way as to cause a hazard.
switch the power on.
3.3.
Turn the fan on by pressing the switch to either "1" or "2" (fig.3) depending on the volume of air required.
3.4.
After use ensure the switch is returned "0" and disconnect the fan from mains power.
3.5.
store the lead onto the stowage hook situated on the drum, near the lifting handle.
4. mAINTENANcE
WARNING! Ensure the fan is disconnected from the mains power supply before attempting any of the following:
4.1.
Use a soft, damp cloth to clean the body of the fan.
DO NOT splash water onto the fan and never allow water to drip onto the motor housing.
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
4.2.
If it becomes necessary to clean the fan blades or inside the fan body, remove the front grille by undoing the 8 bolts around the outside
of the drum. Wipe with a damp cloth only. replace the grille and re-fix using the bolts.
4.3.
should the motor, speed control box or the power lead require service or maintenance contact your local service agent.
4.4.
When not in use protect from dust and store in a safe, dry, childproof location.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey limited
model no: ........................................................................................HVD42B
Fan ø: ..................................................................................... 1065mm (42")
speeds: ........................................................................................................2
speed range: .............................................................................400-450rpm
maximum Airflow: ................................................... 350mtr³/min (12,300cfm)
Power: ........................................................................................... 300-350W
supply: ...................................................................................................230V
current: ...................................................................................................2.7A
fig.2
Sole uK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
fig.2
fig.3
fig.3
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
email
HVD42B
Issue: 1- 16/01/13
Advertisement
