Ebyte E78-470LN22S User Manual page 29

Chengdu Ebyte Electronic Technology Co.,Ltd.
Return value
description
Example
Precautions
Test
command
Command Command
character Type
Test
command
Query
command
Setting
command
CRX1DELAY
Parameter
(Set the number
Description
of times sent)
Return value
description
Example
Precautions
Command Command
character Type
Test
command
Setting
command
Parameter
CSAVE
(Save MAC Description
parameter
Return value
settings)
description
Example
Precautions
Command Command
character Type
CRESTORE Test
(Restore MAC command
default
Setting
parameters)
command
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
<RX1DRoffest>,<RX2DataRate>,<RX2Frequency>For details, see
LoRaWAN agreement.
AT+CRXP=1,1,471000000
OK
Need to be set before sending data. Use the default value when not setting.
Command Format
AT+CRX1DELAY=?
AT+CRX1DELAY?
AT+CRX1DELAY=<Delay>
Delay: how long to open rx1 window after sending, unit: s;
AT+CRX1DELAY=2
OK
Set how long the rx1 window will open after sending, and set before
sending data. It is the protocol default value when not set.
Command Format
AT+CSAVE=?
AT+CSAVE
<MType>: 0: unconfirm package, 1: confirm package.
<value>: is the maximum number of transmissions, ranging from 1 to 15;
This command saves the configuration parameters to EERPOM/FLASH
After executing the AT+RESET command, the module will use the new
MAC configuration parameters for network initialization and operation.
Need to save before sending data
Command Format
AT+CRESTORE=?
AT+CRESTORE
E78-470LN22S User Manual
response
+CRX1DELAY:"Delay"
OK
+CRX1DELAY:<Delay>
OK
OK
response
+CSAVE
OK
OK
response
+CRESTORE
OK
OK
28