Ebyte E78-470LN22S User Manual page 20

Chengdu Ebyte Electronic Technology Co.,Ltd.
Test
command
Query
command
Setting
command
CSTAUS
( Query the
current status of
Parameter
the device )
Description
Return value
description
Example
Command Command
character Type
Test
command
Query
command
Setting
CJOIN
command
(Set Join)
Parameter
Description
Return value
description
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
AT+CSTAUS=?
AT+CSTATUS?
<status>：
00 – No data operation
01 – Data transmission
02 – Data transmission failed
03 – Data sent successfully
04 – JOIN succeeded (only in the first JOIN process)
05 – JOIN failed (only in the first JOIN process)
06 – The network may be abnormal (Link Check result)
07 – Successful data transmission, no
08 – Send data successfully, with
AT+CSTATUS?
+CSTATUS=03
OK
Query the current status of the device
Command Format
AT+CJOIN=?
AT+CJOIN?
AT+CJOIN=<ParaValue1>，
[ParaValue2],....
[ParaValue4]
<ParaTag1>， [ParaTag2]， ......[ParaTag4]： Authentication parameter tag：
1， 2，......4 ；
[ParaValue1]， [ParaValue2]， ......[ParaValue4]： Authentication parameter
value: 1， 2，......4；
<ParaTag1>, indicates that the JOIN operation is performed, ，ParaTag1
Ranges：
0– stop JOIN
1– start JOIN，Restart the JOIN process again. For modules that enable hot
start, performing this action clears the saved JOIN context parameters.
E78-470LN22S User Manual
+CSTATUS:"status"
OK
+CSTATUS:<status>
OK
downstream
downstream
response
+CJOIN:<ParaTag1>,[ParaTag2],...[Para
Tag4
]
OK
+CJOIN:<ParaValue1>,[ParaValue2],...[
Para
Value4]
OK
If the input is legal, first return OK, then
start automatic authentication and return
the authentication result.
+CJOIN:OK Authentication succeeded
+CJOIN: FAIL authentication failed
19