Technical Information - Dishlex DSF6206W User Manual

The washing and drying results are not satisfactory
Problem
There are whitish streaks or bluish lay-
ers on glasses and dishes.
There are stains and dry water drops
on glasses and dishes.
The dishes are wet.
Refer to "Hints and tips" for other
possible causes.

Technical information

Dimensions
Electrical connection 1)
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to
decrease energy consumption.
Rating Plate
• The release quantity of rinse aid is too much. Adjust the rinse aid selec-
tor to a lower position.
• The quantity of detergent is too much.
• The released quantity of rinse aid is not sufficient. Adjust the rinse aid
selector to a higher position.
• The quality of the rinse aid can be the cause.
• The program does not have a drying phase or has a drying phase with
low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• Keep the dishwasher door ajar for some time before removing table-
ware.
• The quality of the multi-tablets can be the cause. Try a different brand
or activate the rinse aid dispenser and use rinse aid and multi-tablets
together.
Width / height / depth (mm)
Voltage (V)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water 2)
Place settings
Left-on mode (W)
Off-mode (W)
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Possible solution
600 / 850 / 625
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
13
5.0
0.10
Information for test institutes
For all the necessary information for test performance,
send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the
rating plate.
13