Philips 75PFL6621 User Manual page 17

The following PC-Input Video signals can be displayed:
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1,024 x 768
1,280 x 768
WXGA
1,360 x 768
FHD 1,920 x 1,080
3,840 x 2,160
UHD
*1
4,096 x 2,160
Other formats or non-standard signals will not be displayed correctly.
*1 UHD format is available only when using the HDMI Connection and
HDMI-DVI Connection.
*2 Refresh rate for VGA Connection is only 60Hz.
Note(s)
•
Please purchase a VGA cable that has a ferrite core (0.6 inches (15mm) or more in diameter).
•
Please purchase a HDMI-DVI Conversion Cable that has a ferrite core.
•
The following operations may reduce noise.
–Attach a ferrite core to the AC Power Cord of your PC.
–Unplug the AC Power Cord and use the built-in battery of your Portable / Laptop PC.
•
Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
•
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is
recommended for the Better compatibility.
•
The Unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p Video signals only when using the
HDMI Connection and HDMI-DVI Connection.
•
HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are
Output as Analog (L/R) Audio.
•
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB Memory Stick
This unit offers easy playback of Picture, Music and Video files.
Insert the USB Memory Stick into the USB terminal shown below.
p. 25
USB
Note(s)
•
The Unit recognizes only a USB Memory Stick.
•
Do Not use a USB hub or an extension cable to connect an External hard disk drive to the Unit.
(Not Supported.)
•
Always insert a USB Memory Stick directly to this Unit.
•
A USB Memory Stick is Not Supplied with this Unit.
•
We Do Not guarantee that All USB Memory Sticks can be supported by this Unit.
•
Be sure to keep a Backup Copy of the Original files on your USB device before you Play them
back on this Unit. We have no responsibilities for damage or loss of your USB Stored Data.
•
To protect your USB Memory Stick files from being erased place the write protect sliding tab in
the protect position (if available).
•
When you are ready to remove a USB Memory Stick, set the Unit to go into Standby mode to
avoid any damage to your data and the Unit.
•
A USB Memory Stick that requires its own driver or the Device with a special system such as
fingerprint recognition are Not Supported.
•
This unit is not allowed to use the USB Memory Stick which requires an External Power Supply
(500mA or more).
Refresh rate
60Hz
24/30/60Hz
*2
17
.
English
Continued on next page.