Ninja BL682UK Owner's Manual page 12

Assembly and Use for the Ninja
USE
Fig. 1
USING THE CHOPPING BLADE ASSEMBLY
1
Review warning and caution statements at the top of page 10
before proceeding to number 2.
2
Holding the Chopping Blade Assembly assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that the
Chopping Blade Assembly fits around the gear shaft and that
it is standing straight.
3 Add the ingredients and secure the bowl lid onto the bowl.
(Fig. 1)
4
Plug the power cord into the electrical outlet and press on the
power button ( ).
5 Select the speed or Auto-iQ
needs. Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency is
reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30 Pulses
allow 10 minutes to pass before running the PULSE function
up to an additional 30 Pulses.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
6 When you have reached your desired consistency, stop the
appliance by pressing the power button ( ) and wait for the
blade to stop turning. (Fig. 2)
7
To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig. 2)
8
Turn the bowl anticlockwise and lift it to remove it from the
motor base. (Fig. 3)
9
To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)
11 0800 862 0453
Processor Bowl - cont.
®
REMOVAL
Fig. 2 Fig. 3
program that best suits your
®
Fig. 4
USING THE DOUGH BLADE ASSEMBLY
1 Holding the Dough Blade Assembly by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the Dough Blade
Assembly fits around the gear shaft and that it is standing
straight. (Fig. 5)
2
Add the ingredients and secure the bowl lid onto the bowl.
3
Plug the power cord into the electrical outlet and press on
the power button ( ). Select the LOW/DOUGH button and
process until ingredients come together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
4
Once finished making dough, stop the appliance by pressing
the power button ( ) and wait for the blade to stop turning.
5
To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig. 2)
6 Turn the bowl anticlockwise and lift it to remove it from the
motor base. (Fig. 3)
7
To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)
USE
Fig. 5