Time Display Selection; Programmed Play - The Singing Machine SMG-301 Instruction Manual

CD OR CD+G OPERATION

TIME DISPLAY SELECTION

Press the DISPLAY button repeatedly during normal play. The display changes in the following
sequence:
REMAIN (Remaining playing time for the current track)
REMAIN TOTAL (Total remaining playing time for the disc)
TOTAL (Elapsed playing time for the disc)
Notes:
During programmed play "REMAIN TOTAL" and "TOTAL" cannot be displayed.
The displayed playing times may differ slightly from the times listed on the notes
accompanying the disc.

PROGRAMMED PLAY

Up to 60 selections, from up to 3 discs, can be programmed for play in any order.
To begin the programming procedure, select the "CD" function first.
The discs or tracks must be programmed in the stop mode.
The same disc or track can be programmed more than once.
Load the disc that you want to programmed before starting programmed play.
Programming procedure
Follow the example below to program tracks 2 and 6 on DISC 1, track 9 on DISC 2 and all tracks
on DISC 3. In this example, each disc has 9 tracks and DISC 3 is in playing position.
1. Press the PROGRAM button.
3
2
1
2. Select DISC 1 by pressing the DISC 1 button.
The DISC SKIP button on the remote control can also be used.
3
2
1
3. Select track 2 by pressing the SKIP
The number button on the remote control can also be used.
TR
3
2
1
4. Press the PROGRAM button.
TR
3
2
1
5. Select track 6 by pressing the SKIP
TR
3
2
1
6. Press the PROGRAM button.
3 TR
2
1
MEMORY
TR
MEMORY
TR
MEMORY
MEMORY
MEMORY
MEMORY
button.
button.
E13