Saab 2006 9-5 Owner's Manual page 85

Adaptation of ACC
It is also possible to customize the ACC system, e.g. to adapt to
driving and weather conditions.
Function Operation in AUTO mode
after adaptation
The rear window heating will
come on after the engine has
started if the outside temper-
ature is below +5 °C.
– This function helps to pre-
vent ice or mist forming on
the rear window in cold,
damp weather. Fuel con-
sumption may increase
slightly.
Seat heating comes on if the
system determines that
heating is necessary based
on the temperature in the
seat and the outside temper-
ature.
Adaptation and restoration of factory settings is done by holding
the respective button depressed approx. 2 seconds until a chime
sounds.
Make sure the ignition is ON.
Factory setting
Function
Heating is selected
manually.
Example: If you want the ACC system to handle activation and deac-
tivation of rear window/door mirror heating, hold the
There are two settings
depressed approx. 2 seconds until a chime sounds.
for heating. Repeat-
The display shows:
edly pressing the but-
ACC:AUTO
ton switches between
low output, high output
RDEFR CTRL
and off.
When "Adaptation of ACC" is done, it will apply until factory settings
are restored.
Instruments and controls
Display text in SID Display text in SID when
during adaptation factory settings are
restored
ACC:AUTO ACC:MANUAL
RDEFR CTRL RDEFR CTRL
ACC:AUTO ACC:MANUAL
SEAT HEATING SEAT HEATING
85
button