Use Audio; Connect To An External Display - Lenovo ThinkPad P14s Gen 1 Manual

Use audio

To enhance your audio experience, connect speakers, headphones, or a headset with a 3.5-mm (0.14-inch),
4-pole plug to the audio connector.
Adjust the speaker volume
Press to increase the speaker volume or press
Change the sound settings
1. Go to Control Panel and view by category.
2. Click Hardware and Sound ➙ Sound.
3. Change the settings as you prefer.

Connect to an external display

Connect your computer to a projector or a monitor to give presentations or expand your workspace.
Connect to a wired display
1. Connect the external display to an appropriate video connector on your computer.
2. Connect the external display to an electrical outlet.
3. Turn on the external display.
If your computer cannot detect the external display, right-click a blank area on the desktop, and then click
Display settings ➙ Detect.
For Intel models, do not connect external displays to the USB-C (3.2 Gen 1) connector
2
connector at the same time. Otherwise, only the external display connected to the USB-C (3.2 Gen 1)
connector 1 will work by default. You can change the priority between the USB-C (3.2 Gen 1) connector and
the HDMI connector from the UEFI BIOS menu. To enter the UEFI BIOS menu, see "Enter the UEFI BIOS
menu" on page 49. Open the Config menu, and then select Display ➙ Shared Display Priority. Then, follow
the on-screen instructions.
Supported resolution
The following table lists the supported maximum resolution of the external display.
Table 1. For Intel models
Connect the external display to
the USB-C (3.2 Gen 1) connector
the Thunderbolt 3 connector (USB-C)
the HDMI connector
to decrease the speaker volume.
Supported resolution
Up to 4096 x 2304 pixels / 60 Hz
Up to 4096 x 2304 pixels / 60 Hz
Up to 4096 x 2160 pixels / 30 Hz
.
Chapter 2 Get started with your computer
1 and the HDMI
29