Thank you for your purchase THANK YOU FOR YOUR PURCHASE! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled □ properly and fully tightened as per the Read all of the instructions in CAUTION: instructions. this manual before you begin assembly. When placing in the desired location, □...
Warranty (continued) We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production. For a copy of our full limited warranty, please contact our customer service team below. Contact the Customer Service Team at 1-866-391-4868 or visit www.bjifurniture.com. Care and Maintenance Do not allow water to build up in frames.
Pre-Assembly PLANNING ASSEMBLY PLEASE READ COMPLETE USE AND CARE GUIDE PRIOR TO ASSEMBLY! Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a nonabrasive surface to avoid scratching. It takes about 25 minutes for two persons to complete all the assembly.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Right arm Left arm Seat frame Back frame Seat cushion Back cushion Lumbar Pillow Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER. □ DO NOT FULLY TIGHTEN BOLT UNTIL INDICATED IN STEP 3. □...
Assembly Instruction Attaching the right arm NOTE: Do not fully tighten the bolts. □ Place the back (D) on a soft, non-abrasive surface carefully. □ Attach the right arm (A) to the back (D) by using M6 hex bolts (BB) and M6 washers (CC).
Page 8
Assembly Instruction (continued) Attaching the seat frame NOTE: Do not fully tighten the bolts. □ Attach the seat frame (C) to the right arm (A) by using M6 hex bolts (AA) and M6 washers (CC).
Page 9
Assembly Instruction (continued) Attaching the left arm □ Attach the left arm (B) to the back frame (D) by using M6 hex bolts (BB) and M6 washers (CC). □ Attach the left arm (B) to the seat frame (C) by using M6 hex bolts (AA) and M6 washers (CC). □...
Page 10
Assembly Instruction (continued) Adding the cushions □ With the assistance of another person turn the chair to an upright position. □ Place the seat cushion (E), back cushion (F) and lumbar pillow (G) onto the rocking chair. □ Repeat these instructions to assemble another rocking chair. □...
Please refer to part number when reordering Questions, problems, missing parts? Before returning to the store, call our Customer Service 8 a.m. - 5 p.m., EST, Monday-Thursday 8 a.m. – 4 p.m., EST, Friday 1-866-391-4868 Made in/ Hecho en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL60179 See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com...
Page 13
Thank you for your purchase THANK YOU FOR YOUR PURCHASE! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled □ properly and fully tightened as per the instructions. Read all of the instructions in CAUTION: When placing in the desired location, □ this manual before you begin assembly. ensure that all legs are resting on the same Failure to do so may result in faulty surface.
Warranty (continued) Proof of purchase (dated register receipt) is required for warranty claims. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production. For a copy of our full limited warranty, please contact our customer service team below. Contact the Customer Service Team at 1-866-391-4868 or visit www.bjifurniture.com.
Pre-Assembly PLANNING ASSEMBLY PLEASE READ COMPLETE USE AND CARE GUIDE PRIOR TO ASSEMBLY! Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a nonabrasive surface to avoid scratching. It takes about 25 minutes for two persons to complete all the assembly.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Table leg Leg Connector Table rim Ceramic tile Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER. □ DO NOT FULLY TIGHTEN BOLT UNTIL INDICATED IN STEP 2. □...
Assembly Instruction Attaching the connector NOTE: Do not fully tighten the bolts. □ Place the leg on a sofa, flat non-abrasive surface. □ Attach the leg connector (B) to the leg (A) using M6 hex bolts (AA) and M6 washers (BB).
Page 19
Assembly Instruction (continued) Attaching the table rim □ Attach the leg (A) to the table rim (C) by using M6 hex bolts (AA) and M6 washers (BB). □ Ensure all bolts are aligned and assembled correctly. □ Tighten all M6 hex bolts (AA) with the hex wrench (DD). Attach the M6 plastic caps (CC).
Page 20
Assembly Instruction (continued) Replacing the ceramic tile top □ Carefully turn the table over and set it down on its legs. □ Place the ceramic tile top (D) onto the table. □ The side table is ready for your enjoyment. WARNING: 1.
Please refer to part number when reordering Questions, problems, missing parts? Before returning to the store, call our Customer Service 8 a.m. - 5 p.m., EST, Monday-Thursday 8 a.m. – 4 p.m., EST, Friday 1-866-391-4868 Made in/ Hecho en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL60179 See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com...