Table of Contents
Advertisement
3.
Place the storage device tray on a flat
and stable surface.
4.
Release the screws on each side of the
storage device tray to release the metal
beam.
The metal beam supports the storage
device tray horizontally to prevent the
storage device tray from bending or
deforming.
5.
Place the SATA/SAS/NVME storage
device into the storage device tray then
secure it with four (4) screws.
NVME storage devices are only
supported on the top 2 (two) storage
bays. If you wish to install an NVME
storage device, ensure to install them
to the 2 (two) top storage bays.
6.
Insert the storage device tray and
storage device assembly all the way into
the depth of the bay until just a small
fraction of the tray edge protrudes.
7.
Push the tray lever until it clicks and
secures the storage device tray in place.
8.
Repeat steps 1 to 7 to install the other
storage devices.
ASUS ESC8000 G4 Series
Metal beam
2-19
Advertisement
Table of Contents
