About The Indicators - Sony SRS-XB12 Help Manual

Help Guide
Wireless Speaker
SRS-XB12

About the indicators

CHG (charge) indicator (orange)
Turns off
Lights up
Flashes quickly (3
times a second)
Flashes slowly
Flashes 3 times and
turns off
Note
A speaker that is in use can be charged if it is connected to an AC outlet via a USB AC adaptor (commercially available), or
connected to a booted computer. In this case, it may take longer to charge the built-in battery depending on the conditions of use.
Therefore, it is recommended to turn off the speaker when charging.
When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to
an AC outlet via a USB AC adaptor (commercially available), or connected to a booted computer. As a result, sound becomes
low. This is not a malfunction. Turn off the speaker and charge the built-in battery sufficiently.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the
speaker stop. To resolve these issues, disconnect the micro-USB cable from the speaker and connect it again within an operating
temperature between 5 °C and 35 °C (41 °F and 95 °F).
Power/ (BLUETOOTH) indicator (blue)
Lights up
Flashes quickly (3 times
a second)
Flashes slowly
Flashes once
Flashes 3 times
L (left)/R (right) indicators (white)
The speaker enters the Speaker Add function.
Flash
The L (left)/R (right) indicators flash when the connection with the Speaker Add function fails.
The Speaker Add function is used on the speaker.
Light up
The speaker has completed charging.
The speaker is being charged.
An abnormality of the built-in battery has been detected. Stop charging immediately.
The built-in battery is running low and needs to be charged.
If the CHG (charge) indicator flashes 3 times and goes off when you turn on the speaker, the
built-in battery is empty and needs to be charged.
The speaker is connected to a BLUETOOTH device.
The speaker enters the pairing mode.
The speaker is waiting for a BLUETOOTH device to connect to.
Each time you press the -/+ (volume) button, the indicator flashes once.
When you operate the -/+ (volume) button and the volume is set at the lowest or highest
level, the indicator flashes 3 times.
49