Unpacking The Kit; Verifying The Kit Contents - National Instruments USRP-2940 Getting Started Manual

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Designed by Ettus Designed by Ettus Research Research
JTAG
1. USRP RIO Device
2. SMA Driver Bit (USRP-2945 Only)
3. Getting Started Guide (This Document)
Caution
you connect multiple USRP RIO devices together, you must connect a 30 dB
attenuator to the RF input (RX1 or RX2) of each receiving USRP RIO device.
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
Figure 1. Kit Contents
RF 0
NI USRP-29 43R NI USRP-29 43R
1.2 GHz - 6 GHz 1.2 GHz - 6 GHz
AUX I/O
RF 1
3.3 VDC MAX
TX1 RX1
RX2
REF PPS
GPS LINK
TX1 RX1
RX2
PWR
TX OUTPUT MAX +20 dBm, RX INPUT
MAX -15 dBm, ALL
RF PORTS 50 W
1
If you directly connect or cable a signal generator to your device, or if
USRP-2940/2942/2943/2944/2945 Getting Started Guide | © National Instruments | 3
2
4
4. SMA (m)-to-SMA (m) Cable
5. 30 dB SMA Attenuator (Not Included with
USRP-2945)
3
5