Adjustment Range By The Lens Position Shift (Optical Axis Shift) - Panasonic PT-FRZ55 Operating Instructions Manual

2) Press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the lens position returns to the home
position.
Note
f Complete the operation within approximately 5 seconds after the [HOME POSITION] screen is displayed. The [HOME POSITION] screen
will disappear after time limit.
f The home position of the lens is used when the projector is being stored, and it is not the optical center of the screen.
f You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.

Adjustment range by the lens position shift (optical axis shift)

Perform the lens position shift within the adjustment range.
Part of the peripheral image may not be visible or the focus may change when the lens position is shifted outside
the adjustment range, but this is not a malfunction.
This projector is equipped with the optical axis shift function, and projection position can be adjusted within the
range indicated in the following figure based on the position of the projected screen in the home position (standard
projection position).
Chapter 3 Basic Operations — Projecting
Projected image width H
0.021 H
Standard projection position
0.021 H
ENGLISH - 53