ENGLISH
42
INTERRUPTION OF THE DESCALING CYCLE
Once you have started the descaling cycle, you must complete it till the
very end without turning off the machine.
In case you get stuck during the descaling procedure, you can exit by
pressing the ON/OFF button. If this happens, follow the steps below.
1
Empty and carefully rinse the water tank, then fi ll it with fresh water up
to the MAX level.
2
Make sure that the power button is on "I".
3
Press the "
" button to turn on the machine.
4
Wait until the "
", "
", "
" and " " buttons are shining steadily.