Ipv4 Network Configuration - Gigabyte R292-4S0 User Manual

5-2-14 IPv4 Network Configuration

Parameter
Configured
Enable DHCP
(Note)
Local IP Address
(Note)
Local NetMask
(Note)
Local Gateway
(Note)
Local DNS Servers
(Note)
Save Changes and Exit
This item appears when Configured is set to Enabled.
(Note)
Description
Indicates whether network address is configured successfully or not.
Options available: Enabled, Disabled. Default setting is Disabled.
Options available: Enabled, Disabled. Default setting is Enabled.
Press [Enter] to configure local IP address.
Press [Enter] to configure local NetMask.
Press [Enter] to configure local Gateway
Press [Enter] to configure local DNS servers
Press [Enter] to save all configurations.
- 77 - BIOS Setup