Table of Contents
Advertisement
3-3
Removing the Heat Sink
Follow these instructions to remove/install the fan duct:
1.
Loosen the captive screws securing the heatsink in place in reverse order (4g3g2g1), then move
the rotating wires into the unlatch position.
2.
Lift and remove the heat sink from the system.
3.
To reinstall the heat sink reverse steps 1-2 while ensuring that you tighten the captive screws in
sequential order (1g2g3g4) as seen in the image below.
1
2
System Hardware Installation
3
1
4
2
- 26 -
Advertisement
Table of Contents
