Playing The Radio - Pontiac 2003 Aztek Owner's Manual

Digital Audio Broadcast (DAB) (Canada Only): DAB
is a Canadian land-based radio service that offers digital
quality audio and text information including song title,
artist name, traffic, weather, emergency announcements
and more. Digital Audio Broadcast transmission services
are currently available in Toronto, Montreal, Vancouver,
Ottawa, and Windsor. In fringe areas signals may be
interrupted by buildings, trees and other obstructions.
Additional services will be added in the future. For current
DAB coverage and other information consult the GM
Canada website at www.gmcanada.com, your dealer
or
call 1-800-263-3777.
Playing the Radio
PWR (Power): Push this knob to turn the system on
and off.
VOL (Volume): Turn the knob to increase or to
decrease volume.
SCV (Speed-Compensated Volume): With SCV, your
audio system adjusts automatically to make up for
road and wind noise as you drive.
Set the volume at the desired level. Press this button to
select MIN, MED or MAX. Each higher choice allows for
more volume compensation at faster vehicle speeds.
Then, as you drive, SCV automatically increases the
volume, as necessary, to overcome noise at any speed.
The volume level should always sound the same to you
as you drive. If you don't want to use SCV, select OFF.
RCL (Recall): Push this knob to switch the display
between the radio station frequency and the time.
Pushing this knob with the ignition off will display the time.
For XMTM (USA only, if your radio is equipped with XMTM
Satellite Radio Service), pressing this button while in
XMTM mode to retrieve various pieces of information
related to the current song
or
channel. By pressing and
releasing the RCL button, you may retrieve four different
categories of information: Artist, Song Title, Category or
PTY, Channel NumberKhannel Name.
For DAB (Canada only, if your radio is equipped with
DAB), pushing this knob switches the display between
channel name and PTY name.
To change the default on the display, push the knob until
you see the display you want, then hold the knob until the
display flashes. The selected display will now be the
default.
3-64