Adjusting The Stands; Power Connection - Beko GNE640E50VZP User Manual

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
In order to adjust the doors vertically,
•Loosen the fixing nut at the bottom
•Screw adjusting nut (CW/CCW) according to the
position of the door
•Tighten the fixing nut for the final position
In order to adjust the doors horizontally,
• Loosen the fixing bolt on the top
• Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
• Tighten the fixing bolt on the top for the final
position
adjusting nut

3.4. Power connection

• Our firm will not assume responsibility for any
• The power cable plug must be easily
• Do not use multi-group plug with or without
adjusting nut
fixing nut
fixing nut
10 / 43 EN
A
WARNING:
sockets in power connection.
B
WARNING:
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
damages due to usage without earthing and
power connection in compliance with national
regulations.
accessible after installation.
extension cable between the wall socket and
the refrigerator.
Do not use extension or multi
Damaged power cable must
Refrigerator / User Guide