Specifications; Functional Description - Milwaukee M18 FID2 Operator's Manual

• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
explosion or risk of injury.
•
excessive temperature.
perature above 130°C (265°F) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
Charging improperly or at temperatures outside the
SERVICE
• Ha
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES
FOR IMPACT DRIVER
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use
cally designed for use on impact wrenches and
drivers. Other sockets and accessories might shatter
or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact MILWAUKEE
trained professional for additional information or
training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
®
a MILWAUKEE service facility for a replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
ADDITIONAL BATTERY SAFETY RULES
WARNING
-
injury, and product damage due to a short circuit,
never immerse your inflator, battery pack or
charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
-
Cat. No. ...................................................M18 FID2
RPM ........................................................... 0 - 3600
IPM ............................................................ 0 - 4300
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Recommended Ambient Operating
Temperature..................-17°C to 51°C (0°F to 125°F)
V

FUNCTIONAL DESCRIPTION

-
®
Tool or a
1. 1/4" Hex drive
chuck
2. LED
3. Control switch
4. Trigger
5. Handle
6. Speed control
7. Belt clip
3
To reduce the risk of fire, personal

SPECIFICATIONS

SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Read Operator's
Manual
1
2
3
4
5
6
7