JVC GZ-RX625 Detailed User Manual page 48

Recording
Using the Self-timer in Still Image Mode
o
1
Open the LCD monitor.
B
.
Check if the recording mode is B.
0
If the mode is A video, tap A on the recording screen to display the
0
mode switching screen.
Tap B to switch the mode to still image.
2
Tap "MENU".
≪PLAY
.
The top menu appears.
0
3
Tap "RECORD SETTING".
TOP MENU
Wi-Fi
OFF
SETUP
.
4
Tap "SELF-TIMER".
RECORD SETTING
.
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
48
MENU
MENU
RECORD
SETTING
CONNECTION
SETTINGS
5
Tap "2SEC" or "10SEC".
SELF-TIMER
OFF
2SEC
.
6
Take a still image.
A timer appears and countdown to shooting starts.
0
To stop the self-timer, press the START/STOP button again.
0
Memo :
The START/STOP button on this unit cannot be used to adjust the focus
0
in advance. To adjust the focus in advance, press and hold the A button
on the touch screen until the focus is adjusted.
"Start recording after adjusting the focus" (A p. 24)
While the countdown timer is displayed, the buttons cannot be used as
0
they are not displayed on the screen.
10SEC