Registering Access Point Manually - JVC GZ-RX625 Detailed User Manual

Registering Access Point Manually

Creating a QR Code
Enter the items required for registering the access point
o
All items will be overwritten and set. Enter all the required items.
0
SSID: Set the identification name (SSID) of the access point.
0
Security Authentication: Set the encryption standard for communication
0
security.
Password: Set the password for the access point.
0
DHCP: Specify whether to obtain the required information for internet
0
connection automatically from the DHCP server (ON) or not (OFF).
When DHCP is set to ON, it is not necessary to set the items following the
0
IP address.
IP Address: Set the information on internet connection (IP address) of the
0
camera.
Subnet Mask: Set the information on internet connection (subnet mask)
0
of the camera.
Default Gateway: Set the information on internet connection (default
0
gateway) of the camera.
Primary DNS: Set the information on internet connection (primary DNS)
0
of the camera.
Secondary DNS: Set the information on internet connection (secondary
0
DNS) of the camera.
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
≪PLAY
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
TOP MENU
Wi-Fi
OFF
SETUP
.
3
Tap "Wi-Fi SETTING".
(Operation on this camera)
Wi-Fi
DIRECT
CONNECTION
.
REC MENU
RECORD
SETTING
CONNECTION
SETTINGS
ACCESS POINT
CONNECTION
Wi-Fi SETTING
Using Wi-Fi by Creating a QR Code
4
Tap "SET FROM QR CODE".
Wi-Fi SETTING
SET FROM QR CODE
.
5
Tap "EXECUTE".
SET FROM QR CODE
Wi-Fi SETTING CAN BE SET
USING WEB USER GUIDE OR
SMART USER GUIDE
EXECUTE
.
Read a QR code.
1
Read a QR code.
(Operation on this camera)
PLEASE READ QR CODE
.
2
Tap "YES".
SET FROM QR CODE
REGISTER THE ACCESS POINT
UNABLE TO REGISTER IF
8 POINTS HAVE ALREADY
YES
.
3
Tap "OK".
SET FROM QR CODE
SETTINGS COMPLETED
OK
.
Tap "NEXT" to return to the screen to read the QR code.
0
Set contents are saved.
0
STOP
NO
NEXT
143