Table of Contents
Advertisement
Maintenance and cleaning
2. Open the filter cover.
3.To drain the water in the machine.
Press the tab on the filter cover downwards and pull the cover out towards yourself.
a. In order to collect the water to flow out of the filter, place a large vessel in front of
the filter.
b. Turn and loosen the pump filter until water starts to flow (counterclockwise). Fill
the flowing water into the container you have placed in front of the filter. Always
keep a piece of cloth handy to absorb any spilled water.
c When the water inside the machine is finished, take out the filter completely by
turning it.
4. Clean any residues inside the filter as well as fibres, if any, around the pump
impeller region.
5. Replace the filter.
6. Close the filter cover.
62 / EN
Washer-Dryer / User's Manual
Advertisement
Table of Contents
