Using The Gap Pad - Philips 55BDL2005X User Manual

1.7.

Using the gap pad

Use the gap pad to ensure appropriate space between
cascaded displays during video wall installation.
1. Remove the release sheet from the gap pad.
2. Stick the gap pad to the top surface of the display where
another display will be stacked. Apply 2 gap pads on the
top surface.
3. Install the top display carefully.
After the displays are mounted, make sure you leave
enough space between displays for removing the gap pad.
If the pad is hard to release, adjust the position of the
display to get enough space.
4. Apply another gap pad on the side surface and repeat the
same process as step 3.
5
55BDL2005X