NEC MultiSync C651Q User Manual page 11

5. Prevent Uipping
When using the display with the optional table top stand,
fasten the LCD to a wall using a cord or chain that can
support the weight of the monitor in order to prevent the
monitor from falling. Fasten the cord or chain to the monitor
using the provided clamps and screws that are included with
the optional table top stand.
Cord or chain
Screw Holes
Without eyebolt brackets
Cord or chain
Screw Holes
With eyebolt brackets
Before attaching the LCD monitor to the wall, make sure that
the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before
moving the LCD.
6. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the enclosure
to allow heat to disperse, as shown below.
Clamp
Screw (M4)
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from
the unit and the mounting equipment; especially when you
use monitors in a multiple screen configuration.
OIUEN:
Clamp
Screw (M4)
English-9
100 mm
100 mm
Must be under 40 Degree Celsius.
The sound quality of the internal speakers will be
different depending on the acoustics of the room.
30 mm