Mitsubishi Electric MR-WX743C Operating Instructions Manual page 26

Cleaning
To prevent the growth of limescale and mold, clean periodically.
Do not use a dishwashing machine, because it may deform the parts.
Do not use the following for cleaning
・Items such as sponges or scrubbers that may
damage surfaces
・Cleaners such as alkaline detergents, scouring
powder, boiling water, petroleum, or acid
Water Tank / Water Supply Pump
Once a week
If mold forms easily in certain types of water, clean
about 2 or 3 times a week.
* When not making ice, remove the water.
1
Lid
Water Tank
2
Tank
Packing
3
4
Impeller
Holder
Impeller
The impeller is made
from a magnet. Wash
it thoroughly to remove
26
any foreign objects.
the Automatic Ice Maker
.
Remove the water tank,
remove the lid, and wash it.
Remove the tank
cap by twisting it.
When using bleaching agents to clean the
water tank and lid, follow the instructions
of the agents.
Pull out the tank packing
from the water tank.
Pull out the tank pipe
and rotate and remove the
water supply pump.
Wash the water tank.
Tank Pipe
Water Supply Pump
Disassemble the
water supply pump
and wash it.
Cap
Cap Lid
Remove the cap lid
while opening the
tab.
Chlorine-Cleaning filter
Wash by lightly rubbing.
* Do not use cleaners such as
kitchen detergents (neutral),
benzene, or bleach. Doing so may
result in odors of the ice.
Tank Cap
Lid
Tank Pipe
Water Tank
Ice Tray
5
Assemble the water supply pump.
1 Fit the filter
onto the cap.
2 Fit the cap lid onto
the cap.
3 Attach the impeller
to the impeller
holder.
4 Rotate and fix the tab (1) of the cap into the
projection (2) on the impeller holder.
Make sure that the impeller is inside.
1
2
Rotate
5 Rotate and set the water
supply pump onto the
water tank.
Align the triangle mark on the
bottom of the water tank with the
triangle mark on the cap lid and
push in while making sure that
there is no gap.
Water Supply Pump
Tank Holder
Water Supply Pipe
After Assembly
After Assembly
After Assembly
After Assembly
Rotate