Table of Contents
Advertisement
2. Function
Indoor unit
Operation ON/OFF by remote controller
Sensing by room temperature
Room temperature sensor.
Pipe temperature sensor.
Room temperature control
Maintain the room temperature in accordance with the setting temperature.
Starting temperature control
Indoor fan is delayed for 5 sec at the
starting
Time Delay Safety control
Restarting is for approx. 3
minutes..
Indoor fan speed control
high, med, low, breeze.
Operation indication Lamps (VLED)
Light up in the VLED for each operation mode.
Two-direction air vane
The unit will decide the louver direction according to operation mode.
Sleep mode auto control
The fan is turn to low speed (cooling/heating).
The unit will be turn off at the seventh hour.
Independent dehumidification
The function is usually used in rainy days in
springtime or damp areas.
Self-diag. function
The function will be
operate in any operation
Air flow Direction control
The louver can be set at the desired position or swing up
and down automatically
Auto mode
The unit can be change by the room temperature.
4
Service manual
Turbo mode
Anti-cold function
Prevent the cold wind at
the beginning of unit
Defrost mode
Auto-restart function
Flexible wiring connection
Easy clean panel
Advertisement
Table of Contents
