Advertisement
Exiting Programming Mode
To exit programming mode, just turn the key from
ACCESSORY to OFF and put the BCM PRGRM fuse
back into the instrument panel fuse block.
NOTE:
After programming a feature, you can exit the
programming mode at anytime.
Windows
Power Windows
The switches on the driver's door armrest control
the front windows (when the ignition is in RUN or
ACCESSORY). The left switch controls the
driver's window. The right switch controls the
passenger's window.
The driver's power window switch has two down
positions. Push the switch to the first position to lower
the window normally.
To activate the auto-down feature, push the switch all
the way down, then release. The window will lower
completely. To stop the window from lowering all the
way, pull up the front of the switch.
To raise the window, pull up the front of the switch.
2-50
Advertisement
