Advertisement
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and
the receiver.
y Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user' s
authority to operate the equipment.
SH2.AUSALLV_SIM_ENG_MFL69480234.indd 3-4
FCC RF Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.
Responsible Party:
LG Electronics USA, Inc.
1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
Tel: 1-800-243-0000
Front Panel
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Power On/Off
1
Subwoofer Connection
Place the subwoofer near the sound bar and follow
steps below.
a
Press each plastic finger pad to open subwoofer
terminals on the unit.
b
Connect the black stripe wire to the terminal
marked - (minus) and the other end to the
terminal (red tube) marked + (plus).
Controller App
Download the Music Flow Bluetooth App to your
device.
Rear Panel
SUB WOOFER (4Ω)
· · · · · ·
Connect to a Subwoofer
OPT. IN
· · · · · · · · · · · · · · ·
Connect to an Optical device
PORT. IN
· · · · · · · · · · · · · ·
Connect to a Portable device
2
TV Connection
a
Connect the sound bar to the TV using
Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
LG Sound Sync (Wireless)
TV
For more information, download the online owner' s
manual. http://www.lg.com
2018-07-13
8:59:14
Advertisement
