3.
After the firmware update completes, the below window appears.
4.
Press ENTER on the remote control. The below window appears.
5.
Press ENTER and then remove the USB driver.
Checking the DVD Firmware Version
Follow these steps:
1.
Turn on the LCD TV.
2.
Press TV/DVD on the remote control to switch to DVD mode.
Make sure there is no disc inserted.
3.
Press and hold the STOP button on the LCD TV and, at the same time, press and hold
the 1 button on the remote control.
4.
After at least 2 seconds, the firmware information is displayed.
SYSTEM UPDATE
Success!!
Please press ENTER key to reset TV
Yes
UPDATE FINISH
Success!!
Please remove the USB Driver and
Press ENTER key for reboot
Yes
No Disc
DAV_RR953WR_102_20100126
85